Description
The SART Tester is designed to provide accurate, independent validation of the operation of any Radar-SART and check its performance under IMO Resolution A.802(19).
The International Marine Organization states that all GMDSS equipment (including SARTs) should be periodically maintained and verified to meet all the performance requirements. In case of test failure, ships may be detained in a port under SOLAS regulation IV/15.8.
The 9GHz Search and rescue radar transponder (radar-SART) is indispensable safety device and it must be checked regularly or annually during radio inspection.
The purpose of an annual testing is to determine that SART is operational as defined in appropriate performance standards for Survival Craft Radar Transponders for use in Search and Rescue Operations, IMO Resolution A.802 (19).
The SART Tester is the professional equipment for SART suppliers, ship surveyors, radio inspectors, classification societies and administrative authorities.
This SART Tester allows ensuring the SART meets the appropriate performance requirements. The SART Tester is portable and easy in use. It is far more effective and reliable than the primitive self-test function offered by any SART. The test results shown on LCD display or printed make easy the further analysis of the SART efficiency.
NATO Serial Number: 6625-12-379-2933.
Specification / Features
SART Tester supports simple procedure of radar-SART checking.
One needs to turn on the tester and then to turn on the radar-SART. After making sure that there is at least 1,5 meters distance between the Tester and the SART, go on with simple actions to carry out the test procedure.
The SART Tester will receive the radar-SART signal, measure the frequency carrier, signal duration, frequency sweep number and will estimate the power level of emitted signal.
The time of one measurement cycle does not exceed 2 minutes.
All data will be saved in memory for further processing. The measured data can be viewed by means of built-in LCD or can be transferred to any PC or laptop.
The tester is lightweight, hand-held and user-friendly in usage, has keyboard and LCD with backlight.
Built-in rechargeable power supply unit performs the tester power supply.
Features:
- Any radar-SART of any manufacturer can be tested
- Reception the signal within the range of 9140…9560Mhz frequencies
- Easy and quick audio-control of the sweep signal presence
- Internal database of received messages
- Easy connection to PC, laptop to process the stored data
- Windows user friendly desktop application for database storage and review, process and test reports printout
- Long life batteries, easy replace
- Easy recalibration without returning back to factory
- 1 year warranty
Connection to PC
After all tests are done usually it is required to process the measured data, prepare and print the test reports.
Therefore we previewed easy connection of the radar-SART Tester to any PC or laptop. The connection is carried out by means of special cable included in standard delivery set and special software available to download below on this website. The minimal requirements are Microsoft OS, such as Windows XP, Windows Vista or Windows 7 and at least 1 physical COM-port.
No special hardware configuration is required.
So, it is very simple to ally the tester with PC. Connect one side of the USB-cable to Tester and other to PC. No need to install any supplementary software. Just run the executive file and press DOWNLOAD MESSAGE button. All saved data will be transferred to PC.
Complete set of SART Tester
- RADAR-SART Tester
- PC Cable (Tester’s outlet – COM-Port)
- Power supply and recharge unit
- Windows software and drivers
- Technical description and operation manual (English)
- Device package
Technical description
The tester allows to perform:
- automatic measurement of SART parameters. One measurement cycle time does not exceed 2 minutes
- measurement of response signal carrier frequency within the range 9140…9560Mhz
- measurement of response signal duration within the range of 50…150mcs
- indication of response signal power level within the range of Рr=300…950mW
- 1 cycle operation time without recharging not less than 7 hours
- automatic monitoring of checked parameters with displaying them on LCD and connection to PC for further processing
- storage of 10 measured parameter blocks in non-volatile memory
Power supply: built-in battery 6V
Current consumption:
standby mode < 85mA
measurement mode < 270mA
Battery charging: 220V AC source; not more than 16 hours
Accuracy of voltage monitoring and indication on LCD: within ± 5%
Operating temperatures: +5°С +55°С
Operating relative air humidity: 95%
